We are available throughout the Christmas period. Don't hesitate to enquire today.

Under the lamp

Case study

Late in 2024, Six Heritage were instructed by Owen Architects to conduct a heritage and condition survey at a listed London terrace house. ​​ Our primary aim was to determine the constructional history and current condition of the existing pitched timber roof structure to inform planning submissions and refurbishment works

Author

Matthew Amis

Service

Heritage and Timber Condition Survey

Completion

October 2024

Client

Commercial

Bloomsbury, London
Bloomsbury, London

The building was Grade II listed and was a great example of an early Georgian terrace house, dating back to approximately 1720-24. ​

The property had been subjected to several campaigns of significant alteration since its initial construction, with the likely removal or reconfiguration of aspects of the buildings to the west, to make way for the adjacent road, and later extensions constructed throughout the 19th and 20th centuries, that projected from the east elevation.

Several interesting architectural details were noted which had contributed towards its listed status, notably the general architectural design and the retention of historical materials, particularly the decorative scroll pediment and characteristics surrounding the external face of the front door, as well as the distinctive features of the entrance hallway, including the ornate leaded lantern that was positioned over the staircase.

Due to the sensitive nature of the property and the various materials that were of particular significance Six Heritage were instructed by a potential buyer to conduct specialist investigations, and provide a succinct report outlining the condition, as well as detailed remedial recommendations specific to any identified defects, so that future occupancy could be effectively risk managed. To meet this brief a holistic approach was taken, assessing the primary materials to gain an understanding of their condition and how their properties and characteristics were interacting with adjacent materials. This allowed us to form a broad understanding of the present defects and any wider consequences these may have, as well as the likelihood and scope of any future refurbishment works.

The use of an aerial drone allowed for inaccessible external roof materials, rainwater drainage goods and chimneystacks to be investigated. Significant defects were noted, particularly at high-level with cracking and material loss to several aspects of the building. Rainwater drainage goods were generally in moderate condition with increased defects and material deterioration at inaccessible locations.

Specialist imaging equipment and environmental instruments were used to gain an understanding of general environments and material behaviours, as well as to determine an approximate understanding of the condition of structural materials. Decay detection drilling and deep moisture probing of structural timbers deduced that the main house was largely free from structural decay and vulnerability, however two of the outbuildings had extensive fungal decay issues which had resulted in significant structural decay to roofs and floors, with deep moisture readings in these areas revealing that the timber elements remained at a heightened risk of further decay and eventual failure. Microscopic timber species identification was undertaken to formally establish the species used to form the roofs, which could help to ascertain the chronology and provenance of the timber and the roof structures

Formal petrographic analysis was not undertaken as part of the survey; however, facades were preliminarily deemed to have been formed of a variant of limestone, likely Bath stone. Facades were deemed to be in moderate condition, with localised historical patch repair and repointing works noted across all elevations, as well as widespread red staining due to the oxidisation of iron deposits within the stone. An aggregated cementitious render was identified over the west elevation and was likely exacerbating damp issues internally.

Bloomsbury, London

Context and materials – Bracker’s marks

Bracker’s marks were identified on the surfaces of several structural timber elements within the roof voids. ​ These markings are indicative of the timber’s quality, dimensions, and origin. ​Historically, these marks were applied using various methods such as carving, stamping, incising, painting, or drawing with materials like chalk, wax, chisels or a rase knife. ​ The Baltic states first officially used bracker’s to grade and mark timbers at the port prior to export, initially for hardwoods and later for softwoods in the mid-19th century. ​

In this instance, the visible bracker’s marks on the rafters suggest that the timber likely originated from the Baltic states, possibly Riga. ​ The marks were inscribed using a rase knife, a method adopted by official bracker’s and timber exporters on the East and South coast of the Baltic Sea. ​The presence of these marks indicates that the timber elements likely dated to approximately the mid-19th century. ​

Evidence such as this identified on site combined with several other factors help provide evidence of the timber’s provenance, aiding in design and material choices for the planned refurbishment works.

Other projects

Get in touch with us today